LCD KEYPAD
11
OPT
KEYPAD FEATURES
1
NOT USED
2
SILENT KEYPAD?
Enable Silent Keypad Option. If enabled, only the entry/exit and
sounder chime are silenced.
3
DING DONG CHIME?
Enable Ding Dong Sound for Chime. If off, chime will be a single
tone. (Refer to NX control panel installation manual, location 40)
4
5 SEC. SILENCE?
Enable Keypress Silence Option. Silences the pulsing keypad
sounder for 5 seconds when a key is pressed.
5
ARMED ZONE INFO?
Enable Armed Zone Information. If on, the LCD keypad will display
faulted or bypassed zone information when the system is armed.
6
BEEP ON PANICS?
Enable Panic, Fire, and Medical Beeptone. Will sound a short beep
to verify that the keypress was accepted.
7
DISABLE SERVICE?
Suppresses the "Service" Message. This will not allow the "Service
Required" message to be displayed for any reason. If there is a
system trouble,
r
will still show the "Service Required" menu.
8
MASTER KEYPAD?
Enable Multi-partition Mode
9
CUSTOM MESSAGE?
Enable Custom Message Display
10
CLOCK? Enable
Clock
Display
11
CUSTOM MSG. LOCK?
Enable Custom Message Lock. Prevents over-writing the custom
message during keypad copy.
12
SELECT AN OPTION: Programs special characteristics.
1=Display “Press
r
For Help”
2=Disable LED Extinguish on this keypad
3=On if PIN should be hidden when programming
4=On suppresses beeps when an RF transmission is lost
5-8=RESERVED (Do not program!)
6f. SET KEYPAD NUMBER AND PARTITION
ACTION
RESULT
Prompts to “Please Enter Your Code".
[program code]
Prompts for the keypad number.
The current keypad number will be displayed
in the lower right hand corner.
[keypad number]
Prompts for the partition number.
The current partition will be displayed in the
lower right hand corner.
[partition number]
Automatically exits this mode.
