LCD KEYPAD
13
DISPLAY
DESCRIPTION
Open
Open - Reports user number, date, time and partition of opening.
Close
Close - Reports user number, date, time and partition of closing.
Exit Err
Exit Error - Entry/Exit zone was faulted at the instant the exit delay expired.
Rec Close
Recent Close - An alarm occurred within 5 minutes after the control was armed.
Autotest
Auto Test - Sending a communicator test at a specified interval.
Start Prog
Start Programming - Local programming is started.
End Prog
End Programming - Local programming is ended.
Start Dnld
Start Download - Download session is started.
End Dnld
End Download - Download session is ended.
Cancel
Cancel - System is disarmed; Cancel was initiated within 5 minutes of an alarm.
Gnd Flt
Ground Fault - A short to ground has been detected.
Man Test
Manual Test - Bell and/or communicator test while system is in disarmed condition.
Re-exit
Re-Exit - The exit delay has been re-started without disarming the system.
Output Trip
Output Trip - A trip has occurred on an expander auxiliary output.
Data Lost
Data Lost - Communication of a signal has failed (log only event).
Walk-test
Walk-Test - A zone “Walk-Test” mode has been activated.
End Test
End Test - Test has been ended.
Cross-Trip
Cross Trip - The first zone of a cross zone has been tripped (log only event).
Expansion
Event
Expansion Event - An expansion module has created an undefined event.
Partial Arm
Partial Arm - Reports a closing in the stay mode.
Listen In
Listen In - A listen in function has been activated.
Service Start
Service Start - Technician is on site.
Service End
Service End - Technician is off site.
Code Entry
Code Entry - A code has been entered.
First Open
First Open - Reports when the first partition is disarmed.
Last Close
Last Close - Reports when the last partition is armed.
Sprnklr
Sprinkler - Instant sprinkler supervisory report
Clock Set
Clock Set - Clock has been reset.
RF Jammed
RF Jammed - A wireless expansion module is jammed
CleanMe
CleanMe - A smoke detector requires cleaning.
7b. SET ELAPSED TIME IN MINUTES SINCE LAST AUTOTEST
ACTION
RESULT
Prompts for a code.
[program code]
Displays the elapsed time screen.
(example only)
[100's digit] [10's digit] [1's digit]
#
Saves and exits.
