LCD KEYPAD
12
7. KEYPAD
FUNCTIONS
7a. READING THE EVENT LOG
The control panel has an event log that can be retrieved using a master code. This log contains a listing
of the last 185 events along with date, time, and partition where the event occurred.
ACTION
RESULT
Prompts to “Please Enter Your Code".
[master code]
Shows the most recent event.
Views the events from newest to oldest.
Views the events from oldest to newest.
The display contains the following information.
This screen shows an opening of Partition 3 on September 25
th
at 5:27 p.m. by user 75. The
shows
that this event is not programmed to be reported to the central monitoring station.
POSSIBLE LOG MESSAGES
DISPLAY
DESCRIPTION
TXlobat
Transmitter Low Battery - The transmitter has a low battery.
ZN Lost
Zone Lost - A wireless or multiplexed zone device is not reporting to the control.
Duress
Duress - The control has been armed or disarmed with a Duress code.
Man Fire
Manual Fire - Keypad “Fire” has been activated.
Aux 2
Auxiliary 2 - Keypad “Medical” has been activated.
Panic
Panic - Keypad “Panic” has been activated.
KP Tamper
Keypad Tamper - The keypad tamper has been activated.
BoxTamp
Box Tamper - The box tamper circuit has been activated.
AC Fail
AC Fail - AC failure has been detected.
OverCur
Over Current - A short circuit of a power supply has occurred.
Srn Tamp
Siren Tamper - A siren or speaker tamper has been detected.
Tel Flt
Telephone Fault - A telephone fault or tamper has been detected.
Exp Trb
Expansion Trouble - An expansion device or keypad is not reporting to the control.
Log Full
Log Full - The event log is full.
Open 75
9/25 17:57
P3
Event
User or Zone ID
Date
(Month/Day)
Partition number
indicates an event
not reported
Time shown in
24-hour format
