ZUMLINK-KP-
Zūm®
Wired Keypad with Link
Communication,
Rocker
Button
Getting Started
Scan
the QR
code
to view the
Quick
Start
Guide.
REMARQUE IMPORTANTE:
Pour
être
conforme
aux
exigences de conformité d’ISED CANADA et de la
FCC en matière d’exposition aux radiofréquences,
l’antenne
utilisée
pour
cet
émetteur
doit être
installée de manière
à
assurer
une
distance de
séparation
d’au
moins
20
cm
de
toutes
les
personnes.
toute
autre
antenne
ou
émetteur.
Federal Communications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation
is
subject
to the
following
conditions:
(1)
This
device
may
not
cause
harmful
interference
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
oper
ation.
CAUTION:
Changes
or modifications
not expressly
approved
by
the
manufacturer
responsible
for
compliance could void the user’s authority to
operate the
equipment.
NOTE:
This
equipment has been tested and found
to
comply
with the
limits
for
a
Class
B
digital
device,
pursuant
to part
15
of
the FCC
Rules.
These
limits
are
designed
to provide
reasonable
protection
against
harmful
interference
in a
residential
installation.
This
equipment
generates,
uses
and
can
radiate
radio frequency
energy
and,
if
not
installed
and
used
in
accordance
with the
instructions, may cause harmful interference to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur in
a
particular installation. If this equipment does cause
harmful
interferenc
e to radio or
television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct
the
interference
by
one or
more
of
the
following
measures:
www.crestron.com/docs/8886
Reorient or
relocate
the
receiving
antenna.
Increase the separation between the equipment
and
receiver.
Connect
the
equipment
into an
outlet
on a
circuit
different
from
that to
which
the
receiver
is
connected.
Consult
the
dealer
or an
experienced
radio/TV
technician
for
help.
For additiona
l
in
f
or
m
ation on the Cre
s
tron
®
ZUMLINK
-KP-
R,
visit
www
.c
re
s
tron
.c
o
m/m
ode
l/651118
7
Regulatory Model:
M201937001
Please
note that any
modifications to
the
device
software
or
configuration,
including
but
not
limited
to the init
file(s),
can
cause
device
performance
to
vary
beyond
the
scope
of
the
currently
referenced
FCC
authorization.
Accordingly,
if
any
user
modifications are sought to be made to the device
software
or
configuration,
the
user
may
be
required
to
independently
seek
fresh
FCC and other
regulatory
authorizations as relevant
prior to
IMPORTANT NOTE:
To
comply
with
ISED
CANADA
and FCC RF
exposure
compliance
requirements,
the antenna
used
for
this
transmitter
must
be
installed
to provide a
separation
distance
of
at
least 20 cm from all persons and must not be co
-
located
or
operating
in
conjunction
with any other
antenna or
transmitter.
