GE MP100 Series, Руководство по обслуживанию

Страница: 77 / 314

Installation
2026419-033E CIC Pro™ 5-3
Format a USB memory stick
To activate licenses with a USB memory stick, you need an NTFS formatted USB
memory stick containing the
<Serial Number of CIC Pro center>.txt license file,
matching the serial number of your CIC Pro center.
1. Insert the blank USB memory stick into one of the service PC’s USB ports.
2. From Windows Explorer, right-click on the Removable Disk drive containing the
USB memory stick and click Properties .
3. On the General tab, note the value of the File system . If it is not NTFS :
 For Windows XP, continue to step 4.

If your operating system is not XP, skip to step 5.
4. (Windows XP only) Optimize the USB memory stick for performance:
a. Click Hardware .
b. Select the USB drive and click Properties .
c. Click Policies and select the Optimize for Performance option.
d. Click OK twice to close the windows.
5. From Windows Explorer, right-click on the Removable Disk drive containing the
USB memory stick and click Format .
6. On the Format window, select NTFS from the File system drop-down list and
click Start .
7. Verify that this is the USB drive you want to format and click OK .
8. Remove the USB memory stick.
a. In the Windows system status tray, click the Safely Remove Hardware icon
to safely stop running the USB memory stick.
b. On the Safe Eject window, choose the drive running the USB memory stick.
Typically, this is drive H:\ on the CIC Pro center.
c. Remove the USB memory stick from the USB port.
Procure necessary licenses
Procure the applicable licenses for your installation.
NOTE
The <Serial Number of CIC Pro center>.txt license file (e.g.,
SCY07150960G4.txt) and Activation Code Summary Sheet may have been
shipped electronically. For another copy of the Activation Code Summary sheet,
<Serial Number of CIC Pro center>.txt license file, or a blank USB memory
stick, contact Technical Support (Refer to the How to reach us page). For the part
number of the USB memory stick, see
Accessories on page 9-6 .
1. Insert the blank NTFS formatted USB memory stick into one of the service PC’s
USB ports.
See Format a USB memory stick on page 5-3.