GE MP100 Series, Руководство по обслуживанию

Страница: 117 / 314

Configuration
2026419-033E CIC Pro™ 6-23
NOTE

If the NO COMM is set to DISABLE , a visual only indicator will appear in
the multi-patient viewer window at the CIC Pro center. The clinical user will
not receive an audible notification.
DISABLE is the factory default setting.
 If the NO COMM is set to ENABLE , the clinical user will receive a crisis
level audible notification in addition to a visual NO COMM indicator in the
multi-patient viewer window.
When enabled, the system shall provide audible indication for NO COMM
in no more than 188 seconds from a loss of network communication with a
monitor.
Complete the following procedure to activate the NO COMM alarm on the CIC Pro
center:
1. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
2. Click Configuration > Set Flags .
NOTE
The Set Flags Module screen shows the current set flags settings, which can
be modified.
3. In the NO COMM field on the Set Flags Module screen, click Enable .
4. Click Submit .
5. Restart the application. See Perform safe restart of the CIC Pro center on page 8-
30.
6. Verify the new settings prior to monitoring patients.
Configure force age setting, if applicable
If the force age setting is enabled , a default age range will not be displayed in the Age
field, and the New Patient button will be disabled. If the force age setting is disabled ,
when a patient admit is attempted and no age is selected, a message will prompt the
user to enter the patient age. This setting is usually applicable for pediatric care areas.