GE MP100 Series, Руководство по обслуживанию

Страница: 121 / 314

Configuration
2026419-033E CIC Pro™ 6-27
4. Click Submit .
5. Restart the application. See Perform safe restart of the CIC Pro center on page 8-
30.
6. Verify the new settings prior to monitoring patients.
Configure the CIC Pro center language
WARNING
LANGUAGE LOCALIZATION—The CIC Pro center leaves the
factory with the CIC Pro center application software set to English.
Prior to placing this device into operation, you must set the language
to the language required by your region or locale.
Changing to a new language other than English should only be done
if the current CIC Pro center application language is set to English.
For example, do not set the language to Chinese unless the CIC Pro
center is currently set to English. If the CIC Pro center is not
currently running in English, then reimage the system, which will
default to English and allow you to set the CIC Pro center to the
required language.
NOTE
The Webmin interface is always in English.
Complete the following procedure to set the language of the CIC Pro center’s
software application:
1. If you are not already logged onto the CIC Pro center as administrator, Log on to
the CIC Pro center as Administrator on page 4-3 .
2. From the desktop, launch Internet Explorer.
3. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
4. Click Configuration > Language .
Option Description
Enable Enables any ADU buttons audible alarms for any out-of-unit patient
displayed in a multi-patient viewer window at the CIC Pro center.
Disable Disables any ADU buttons audible alarms for any out-of-unit patient
displayed in a multi-patient viewer window at the CIC Pro center.