GE MP100 Series, Руководство по обслуживанию

Страница: 136 / 314

6-42 CIC Pro™ 2026419-033E
Configuration
alarms. You can configure the multi-patient viewer alarm audio and ADU
window.
 If the mirror CIC Pro center is v4.1.1 or earlier, alarms will be visible but not
audible.

If the mirror CIC Pro center is in the same care area, then alarms will be both
audible and visible, and it is not version dependent.
Set up a mirror CIC Pro center
If you are running the CIC Pro center application in either Russian or Spanish, See
Restriction in setting up a mirror CIC Pro center (using a Russian or Spanish CIC Pro
center application) on page 6-42.
If you are running the CIC Pro center application in a language other than Russian or
Spanish,
See Set up a mirror CIC Pro center (using a non-Russian and non-Spanish
CIC Pro center application) on page 6-42.
Restriction in setting up a mirror CIC Pro center (using a
Russian or Spanish CIC Pro center application)
1. Do not create a primary and mirror configuration between CIC Pro center
application versions 5.0.7/5.0.8 and 5.1.x, or vice versa. See the table below for
additional clarification.
Set up a mirror CIC Pro center (using a non-Russian and
non-Spanish CIC Pro center application)
Complete the following procedure to set up a mirror CIC Pro center:
1. From the multi-patient viewer, click Setup CIC .
2. Log on to Setup CIC with service access on page 4-5 .
3. At the remote CIC Pro center (mirroring the main CIC Pro center), click Setup
CIC > Display Configuration .
NOTE
Auto Display is disabled on the remote CIC Pro center. However, it is still
active on the main CIC Pro center.
Mirror Primary Status
v5.0.7/v5.0.8 v5.0.7/v5.0.8 Supported
v5.1.0 v5.1.0 Supported
v5.0.7/v5.0.8 v5.1.0 Not supported
v5.1.0 v5.0.7/v5.0.8 Not supported