GE MobileView, Руководство пользователя

Страница: 27 / 52

MobileView User Manual 4 Testing Connections
1036564B / October 2002 27
CURRENT STATE OF INPUTS:
1L 2H 3H 4H 5H 6H NEXT
TO TEST OUTPUTS PRESS UP
OUT 1 <OFF> OUT 2 <OFF> NEXT
TO TEST OUTPUTS PRESS UP
OUT 1 <OFF> OUT 2 <ON> NEXT
TO TEST OUTPUTS PRESS UP
OUT 1 <ON> OUT 2 <OFF> NEXT
TO TEST OUTPUTS PRESS UP
OUT 1 <ON> OUT 2 <ON> NEXT
IGNITION OFF TEMP ----C
DOOR ------ NEXT
IGNITION ON TEMP 26C
DOOR CLOSED NEXT
5) Test the Impact Sensor by tapping on the front
end of the sensor. Watch the keypad while
tapping; it should display input 2 as open
(Figure 41). When you stop tapping the
sensor, the keypad should reset to showing
input 2 as closed (Figure 40). If the keypad
does not show input 2 opening and closing,
check the Impact Sensor’s connections to the
DVR (see section
3.2.3.1 Impact Sensor Connections ).
6) Continue testing until all inputs have
successfully been connected to the DVR.
4.2.2 T
ESTING
O
UTPUTS
1) From the Current Status menu (Figure 41),
press
to proceed to the Test Outputs menu
(Figure 42).
2) Press to test output 2 (Figure 43). If a status
light is connected to output 2, the light
illuminates.
3) Press again to test output 1 (Figure 44).
If a status light is connected to output 1, the
light illuminates.
4) Press again to test both outputs (Figure 45).
Both lights illuminates.
4.2.3 DVR S
TATUS
1) To display the status of the DVR, press from
the Test Outputs menu (Figure 45). The screen
will display whether the ignition is on or off, the
current temperature of the DVR (in Celsius),
and whether the DVR door is open or closed.
Figure 46 shows the keypad screen without a
DVR in the system. Figure 47 shows the
keypad screen with a DVR in the system.
2) Press again to return to the Test DVR
display (Figure 37).
Figure 41. Current Status menu—input 2 open
Figure 42. Test Outputs menu
Figure 43. Test Outputs menu—testing output 2
Figure 44. Test Outputs menu—testing output 1
Figure 45. Test Outputs menu—testing both outputs
Figure 47. DVR status menu—DVR in system
Figure 46. DVR status menu— no DVR in system