GE MAC 1600, Руководство по обслуживанию

Страница: 53 / 146

Troubleshooting
A: Clean the exterior surfaces of all the equipment and peripheral devices monthly, or
more frequently if needed.
1. Use a clean, soft cloth and a mild dishwashing detergent diluted in water.
2. Wring the excess water from the cloth.
Do not drip water, or any liquid, on the writer assembly, and avoid contact with
open vents, plugs, and connectors.
3. Dry the surfaces with a clean cloth or paper towel.
Battery Capacity
Q: What is the capacity of the battery?
A: GE Healthcare recommends that you connect the device to AC power through a wall
outlet whenever it is not in use. If you are operating the device off AC power, be aware
that a fully-charged battery is capable of taking approximately 50 or more ECGs with
one-page printed reports, or three hours of continuous operation (without printing).
MAC Address
Q: I need to provide the MAC address of the device to the network administrator to
enable the LAN communication option. How do I obtain the MAC address?
A: Follow these steps to obtain the MAC address:
1. Open the DIAGNOSTIC TESTS window as described in “Accessing the System
Diagnostics Function” on page 33 .
2. Select Service Report and press Enter .
3. Find the MAC address on the printed service report.
System Setup
This section answers questions regarding system setup for the system.
Location Number
Q: When entering in the patient data, how do I get the Location field to automatically
populate with the same number?
A: You can set the Location number in Basic Setup so you do not need to enter it
for each test.
1. On the Main Menu , press F5 ( System Configuration ).
2. Press F1 ( Basic Setup ).
3. Use the Trimpad to move the cursor to the Location field.
4. Type the desired Location number.
5. Press F6 ( Save ) > F5 ( Main Menu ).
Patient Questions
Q: How do I change the questions I see when I am entering the patient data?
2028451-183E MAC™ 1600 53