GE MAC 1600, Руководство по обслуживанию

Страница: 29 / 146

3
Troubleshooting
General Fault Isolation
Refer to your system’s Operator’s Manual, Chapter 2, “Equipment Overview” to
verify operation of the device.
Power Up Self-Test
On power-up, the system automatically runs an internal self-test. If all tests pass,
you see the following start-up screen.
The next screen to open depends on the Power Up mode selected in System
Configuration . The Resting ECG mode is the default Power Up mode.
If the equipment is not working properly, consider the following:
• Is the unit turned on?
• Have there been any changes in the use, location, or environment of the equipment
that could cause the failure?
• Has the equipment hardware or software been modified since the last use?
• Is operator error the cause of the problem?
Try to repeat the scenario exactly and compare that to the proper operation of the
equipment described in the manual.
2028451-183E MAC™ 1600 29