GE iVent 201 Series, Руководство пользователя

Страница: 71 / 290

3 Operating the iVentTM201 – Setting Modes and Parameters
59
INTRODUCTION
The iVent
TM
201 offers advanced capabilities for adjusting ventilation parameters
for each mode. In this section you learn how to:

Start the ventilator

Choosing a patient weight

Test the patient circuit

Choose a mode of ventilation

Use the Mode screen and the Menu screen to change parameters

Understand breath data returned by the iVent
TM
201

Reset parameters to default values
OPERATION OF THE IVENT
TM
201
The following section describes the various functions and capabilities for
operating the iVent
TM
201.
POWER UP AND WEIGHT SELECTION
If you have installed a patient circuit then you are ready to begin operating the
iVent
TM
201. To turn on the power, press the green ON/OFF switch on the rear
panel.
When power is turned on, the software performs a self-test. Once the boot up
process completes (after approximately thirty seconds) you hear a beep and the
screen (Figure 28) asks you to select the patient’s body weight, which sets the
default ventilation parameters.
Figure 28: The Patient Weight Selection Pop-Up Window