GE iBox, Руководство по установке и обслуживанию

Страница: 103 / 172

GE Grid Solutions
iBox/iBox Kit
Installation and Maintenance Guide
GE Information
994-0047-5.10-4 103
Configuring the iBox PPP Driver and Internet Data Links
Procedure:
Configuring
the PPP
Driver
Step Action
1 Select the iBox device.
2 Click Communications > Options .
Result: The D2x Device Communication Options window > Interface tab
appears.
3 Select the PPP Connection Type.
Result: The tabs applicable to the connection type appear.
4 Click the Tables tab.
5 On the PPP main config tab, verify the following settings and modify
them if necessary:
Field Value
Port COM3
Baud 19.2K
Bits per char 8
Parity Type Even
Parity Mode None
Stop Bits 1
RTS Disable
CTS Disable
DCD Enable
RTS on delay 0
DCD on delay 0
RTS off delay 0
Max PPP receive unit 1500
Restart timer 3
ACCM Disable
CHAP Disable
Challenge_retries 2
Challenge_period 5
Note: You should not need to change any of the above settings from
their default values. If you do, you also need to make
corresponding changes to the Digi One
®
Ethernet Module, if
equipped, or to the equipment to which the iBox Ethernet port is
connected. See “Configuring the Ethernet Module” on page 109.
6 Close the
PPP Driver
window.
7 Click
Yes
to save your changes.
Continued on next page