The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner is turned
to
LITE,
all the burners spark. Do not
attempt to disassemble or clean
around any burner while another
burner is on. An electric shock may
result, which could cause you to
knock over hot cookware.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device
is re-engaged properly when the range is replaced. Failure to take this precaution could
result in tipping of the range and cause injury.
27
Grate
Burner head
Burner cap
Cooktop
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
Sealed Burner Assemblies
Turn all controls
OFF
before removing
the burner parts and drip pans (if so
equipped).
The burner grates, caps, burner heads and
drip pans (if so equipped) can be lifted off,
making them easy to clean.
CAUTION:
Do not operate the
cooktop without all burner parts, drip pans (on some
models) and grates in place.
Care and cleaning of the range.
www.GEAppliances.com
Drip pan (on
some models)
Electrode
Drip Pans
(on some models)
Remove the grates and lift out the drip
pans. Drip pans can be cleaned in a
dishwasher or by hand.
When replacing the drip pans, make sure
they are in the correct position.
To get rid of burned-on food, place them
in a covered container (or plastic bag)
with 1/4 cup ammonia to loosen the soil.
Then scrub with a soap-filled scouring pad
if necessary.
CAUTION:
Do not clean the drip
pans in a self-cleaning oven.
Electrode
Consumer Support
Installation Instructions
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions