Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Consumer Support
26
The oven door must be closed and all controls set correctly for the cycle to work properly.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with a soap-
filled scouring pad and rinse thoroughly with
a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
■
You cannot set the oven for cooking until
the oven is cool enough for the door
to unlock.
■
While the oven is self-cleaning, you can
touch the
TIMER/CLOCK
pad to display
the time of day. To return to the clean
countdown, touch the
COOKING TIME
pad.
■
If the shelves become hard to slide,
apply a small amount of vegetable oil or
cooking oil to a paper towel and wipe
the edges of the oven shelves with the
paper towel.
Using the self-cleaning oven.
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
If your model has a latch, latch
the door.
Touch the
SELF CLEAN
pad.
Using the
+
or
–
or the number pads,
enter the desired clean time.
Touch the
DELAY START
pad. The
earliest start time you can set will
appear in the display.
Using the
+
or
–
or the number pads,
enter the time of day you want the
clean cycle to start.
Touch the
START
pad.
On models without a door latch, the door
locks automatically. The display will show
the start time. It will not be possible to open
the oven door until the temperature drops
below the lock temperature and the
LOCKED DOOR
light goes off.
The oven shuts off automatically when the
clean cycle is complete.
When the
LOCKED DOOR
light is off,
slide the latch handle to the left as far
as it will go and open the door. If your
range does not have a latch, the door
will unlock automatically.
■
The words
LOCK DOOR
will flash and the
oven control will signal if you set the
clean cycle and forget to close the oven
door or forget to latch the door on
models with a latch.
■
To stop a clean cycle, touch the
CLEAR/OFF
pad. When the
LOCKED DOOR
light goes off indicating the oven has
cooled below the locking temperature,
unlatch the door (on models with a
latch) and open the door.