Your new touch pad control has additional features that you may choose to use. The following are the features and
how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the
control’s memory until the steps are repeated.
When the display shows your choice, touch the
START
pad. The special features will remain in memory after
a power failure.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
BROIL HI/LO
and
COOKING
TIME
pads at the same time. The
display will show
F
(Fahrenheit).
Touch the
BROIL HI/LO
and
COOKING
TIME
pads again at the same time.
The display will show
C
(Celsius).
Touch the
START
pad.
Special features of your oven control.
www.GEAppliances.com
12 Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or after
3 hours during a broil function.
If you wish to turn
OFF
this feature, follow
the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
DELAY START
pad. The
display will show
12 shdn
(12 hour
shut-off). Touch the
DELAY START
pad
again and the display will show
no shdn
(no shut-off).
Touch the
START
pad to activate the
no shut-off and leave the control set in
this special features mode.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the
CLEAR/OFF
pad is touched. This continual
6-second beep may be canceled.
To cancel the 6-second beep:
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
BROIL HI/LO
pad. The
display shows
CON BEEP
(continual
beep) and
BEEP
. Touch the
BROIL
HI/LO
pad again. The display shows
BEEP.
(This cancels the one beep
every 6 seconds.)
Touch the
START
pad.
Consumer Support
Operating Instructions
Safety Instructions
Installation Instructions
Tr
oubleshooting T
ips
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads when
setting a time or temperature, you may notice the
display changes slowly. This special feature allows
you to change the speed.
To set the speed you prefer, follow the steps
below.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
+
pad. The display will show
you a set speed between 1 and 5.
Touch the
+
pad to increase the speed
up to the number 5.
Touch the
–
pad to decrease the speed
down to the number 1.
Touch
START
to activate the setting
and leave the control set in this special
features mode.
17