GE DVSR xU, Руководство пользователя

Страница: 51 / 104

DVSR xU User Manual 47
Table 11: Notification options on how to respond to a camera tamper alarm
Notification option Reponse
Alarm Out

Alarm Out is activated. Up to four alarm outputs can be enabled.
Buzzer

An audible alarm sounds
TCP

Alarm information is sent to the remote IP (see section Network on page 60
for more information)
Full Screen

The alarm channel will be displayed on screen
Email

Alarm information is sent to an e-mail address (see section Network on
page 58 for more information)
e. When you have finished modifying all the menu items required, select OK to confirm changes
and return to the Camera menu.
5. Repeat steps 2 to 4 for each camera and then return to the Camera menu.
To setup a video loss alarm
The video image can be lost if a video cable or camera develops a fault. The unit can be setup so that
an alarm is triggered when a video loss fault occurs. However, the video loss alarm is only triggered if
it occurs during a programmed time schedule
1. In the Camera menu go to the Camera list box. Select the camera whose options you want to
modify.
2. Go to the Advanced Settings submenu and enable (

) the Video loss check box. The Rules setup
button is activated.
3. Go to the Rules setup button and press Enter or left-click the mouse. The v ideo loss rules submenu
appears. See Figure 37.
Figure 37: The video loss rules submenu