DVSR xU User Manual
35
For example: If a 16-channel DVSR xU has the 4-screen live mode and the 20-second switch time
mode selected, the DVSR xU will cycle four camera displays every 20 seconds.
5. Go to the
Audio
check box and press EDIT or left-click the mouse to enable (
).
6. Go
to
Alarm Aux Out
to select which monitor should work as an alarm spot monitor. If there is an
alarm, the video will pop up on this monitor.
7. Go to the
Alarm Dwell Time
edit box and select the time delay required: Off, 3, 4, 5, or 10 seconds.
This is the time delay before the alarm video appears onscreen. If there is more than one alarm,
there is also the delay switching between the alarm videos.
8. Go
to
Display Layout
. Select in which order the cameras will be displayed by going to the first
square and press the number button(s) that correspond to the number of the camera you want
displayed first. Continue for each camera. The order they will be previewed is displayed in the bar
underneath.
Note:
It is recommended that you first select the layout order and then the live mode.
9. When complete, go to OK and press Enter or left-click the mouse to accept all the changes and
return to the Display menu.
Содержание DVSR xU
