46
DVSR xU User Manual
3.
To set the zone on screen that can trigger a camera tamper alarm
a. In the Advanced Settings submenu go to the
Zone
setup button. Press Enter or left-click the
mouse to access the matrix screen.
b. The setup is the same as for masking a zone. See the section on setting up a privacy mask on
page 44 for further instructions.
Note:
Only one zone can be masked to trigger a camera tamper alarm.
c. When you have finished masking the tamper zone press Enter, or right-click the mouse and
select OK, to confirm your changes and return to the Camera menu.
4.
To setup the tamper alarm response
a. In
the
Advanced Settings
submenu go to the
Camera Tampering
Rules
setup button. Press
Enter or left-click the mouse to access the Rules submenu. See Figure 36.
Figure 36: The camera tampering Rules submenu
b. Go to the
Alarm Schedule
list box. Select the day of the week for which you want to set the
response time schedule.
c. Go
to
Period 1
and enter the time period for the response. You can set up to four time periods
for each day of the week. You must reboot the DVSR xU to make the time periods operational.
Note:
The daily time periods cannot overlap.
d. Go to the notification options and press Enter or left-click the mouse to enable (
) or disable
how you want the DVSR xU to respond to a camera tamper alarm. See Table 11.
Содержание DVSR xU
