GE Druck ADTS 2 Series, Руководство пользователя

Страница: 64 / 70

Druck ADTS 2XX User Manual 52
K0451 Issue No. 1
T
ABLE
5-3 E
RROR
M
ESSAGES
(
CONTINUED
)
261 "Calibration switch has not
enabled." Switch not selected Set calibration switch
262 "Valve characterisation data is
invalid. Restoring from FLASH." Invalid/corrupted data, recovery
in progress Allow for complete recovery
before continuing
263 to 290 "Valve constant out of range" Essential system data failure Return unit to repair depot
293 "Limit entry changed to MAX limit
set" User tried to enter limit out of
range of the ADTS 2XX Re-enter within maximum range
of the ADTS 2XX
295 "CAS is outside MAX limits" Differential pressure applied at
Ps1/Pt ports over-range Check/reduce Ps1/Pt pressures
applied to ADTS 2XX
296 "Alt1 is outside MAX limits"
or
"Alt2 is outside MAX limits Pressure applied at Ps1 port or
Ps2 port over-range Check/reduce Ps1 or Ps2 pressure
applied to ADTS 2XX
297 "ROC is outside MAX limits" Rate of pressure change at Ps1
port too high Check/correct hose or aircraft
system Ps1 or Ps2 leak
298 "Qc is outside MAX limits" Differential pressure applied at
Ps1/Pt ports over-range Check/reduce Ps1/Pt pressures
applied to ADTS 2XX
299 "Ps1 is outside MAX limits"
or
"Ps2 is outside MAX limits Pressure applied at Ps1 port or
Ps2 port over-range Check/reduce Ps1 or Ps2 pressure
applied to ADTS 2XX
300 "RtPs1 is outside MAX limits"
or
"RtPs2 is outside MAX limits" Rate of pressure change at Ps1
port or Ps2 port too high Check/correct hose or aircraft
system Ps1 or Ps2 leak
309 "Hand terminal short circuit" Faulty cable or hand terminal Check cable, if necessary, replace
hand terminal
313 Calibration data not entered. Enter
calibration date" Date entry step missed in
calibration procedure Enter date field requested