manualshive.com logo in svg

GE D30 series, Инструкция по эксплуатации

Инструкция по эксплуатации GE D30 Series доступна для бесплатного скачивания на нашем сайте. Получите необходимый руководство в формате PDF и ознакомьтесь с подробными инструкциями по использованию вашего устройства. Не забудьте скачать руководство с manualshive.com.

Поделиться
Скачать
background image

5-26

D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

Some relay messaging characteristics can be modified to suit different situations using the display properties settings.

LANGUAGE

 — This setting selects the language used to display settings, actual values, and targets. This setting displays 

when a language other than English was purchased, and the range depends on the order code of the relay.
For Japanese, the settings display in Japanese on the graphical front panel, while the keys printed on the panel are in 
English.
For Japanese and Chinese, up to 10 characters can be input in a field on the graphical front panel, not 20.
With the graphical front panel, the language can be changed regardless of the language purchased. That is, all languages 
can be used. If you select a language with which you are unfamiliar and want to switch back to English for example, the 
menu order remains the same. That is, Settings is always second, Product Setup is always first, Display Properties is always 
second, and Language is always first.
If the language is changed after entering user-configured names, such as relay names, the strings are not translated. For 
example, a relay name is entered in English, the language is changed to Japanese, and the relay name remains in English. 
Set the language before changing settings.
The language can be selected also for the front panel in EnerVista under 

Maintenance > Change Front Panel

.

The language of the EnerVista software can be changed under 

View > Language

.

FLASH MESSAGE TIME

 — Flash messages are status, warning, error, and information messages displayed in response to 

certain key presses during settings programming. These messages override any normal messages. Use this setting to 
change the duration of flash messages on the display.

DEFAULT MESSAGE TIMEOUT

 — If the keypad is inactive for a period of time, the relay automatically reverts to a default 

message. The inactivity time is modified using this setting to ensure that messages remain on the screen long enough 
during programming or reading of actual values. This setting is not supported on the graphical front panel.

DEFAULT MESSAGE INTENSITY

 — To extend phosphor life in the vacuum fluorescent display, the brightness can be 

attenuated during default message display. During keypad interrogation, the display always operates at full brightness. 
This setting is not supported on the graphical front panel.

SCREEN SAVER FEATURE

 

and

 

SCREEN SAVER WAIT TIME

 — These settings are only visible if the D30 has a liquid crystal display 

(LCD) and control its backlighting. When the 

SCREEN SAVER FEATURE

 is “Enabled,” the LCD backlighting turns off after the 

DEFAULT MESSAGE TIMEOUT

 followed by the 

SCREEN SAVER WAIT TIME

, provided that no keys have been pressed and no 

target messages are active. When a keypress occurs or a target becomes active, the LCD backlighting turns on. These 
settings are not supported on the graphical front panel.

CURRENT CUT-OFF LEVEL

 — This setting modifies the current cut-off threshold. Very low currents (1 to 2% of the rated value) 

are very susceptible to noise. Some customers prefer very low currents to display as zero, while others prefer the current to 
display even when the value reflects noise rather than the actual signal. The D30 applies a cut-off value to the magnitudes 
and angles of the measured currents. If the magnitude is below the cut-off level, it is substituted with zero. This applies to 
phase and ground current phasors as well as true RMS values and symmetrical components. The cut-off operation applies 
to quantities used for metering, protection, and control, as well as those used by communications protocols. Note that the 
cut-off level for the sensitive ground input is 10 times lower that the 

CURRENT CUT-OFF LEVEL

 setting value. Raw current 

samples available via oscillography are not subject to cut-off.

VOLTAGE CUT-OFF LEVEL

 — This setting modifies the voltage cut-off threshold. Very low secondary voltage measurements 

(at the fractional volt level) can be affected by noise. Some customers prefer these low voltages to be displayed as zero, 
while others prefer the voltage to be displayed even when the value reflects noise rather than the actual signal. The D30 
applies a cut-off value to the magnitudes and angles of the measured voltages. If the magnitude is below the cut-off level, 
it is substituted with zero. This operation applies to phase and auxiliary voltages, and symmetrical components. The cut-off 
operation applies to quantities used for metering, protection, and control, as well as those used by communications 
protocols. Raw samples of the voltages available via oscillography are not subject to cut-off.
The 

CURRENT CUT-OFF LEVEL

 and the 

VOLTAGE CUT-OFF LEVEL

 are used to determine the metered power cut-off levels. The 

power cut-off level is calculated using the following equations. For Delta connections:

Eq. 5-3

Содержание D30 series















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D30 series

Aalborg DPC Operating Manual preview
DPC
Бренд: Aalborg Страницы: 128
IBM 2702 Information Manual preview
2702
Бренд: IBM Страницы: 105
Gardigo 80000 Instruction Manual preview
80000
Бренд: Gardigo Страницы: 8
Gardigo 60035 Instruction Manual preview
60035
Бренд: Gardigo Страницы: 19
JENCO 6311 Operation Manual preview
6311
Бренд: JENCO Страницы: 36
jcm-tech WAVE500 User Manual preview
WAVE500
Бренд: jcm-tech Страницы: 8
Lattice Semiconductor MachXO5-NX Development Kit Quick Start preview
MachXO5-NX Development Kit
Бренд: Lattice Semiconductor Страницы: 2
iluminize 5110 V1 Manual preview
5110 V1
Бренд: iluminize Страницы: 2
Polycom VVX Series Basic Troubleshooting preview
VVX Series
Бренд: Polycom Страницы: 2
Baninni BN-1266 MILANO Instruction Manual preview
BN-1266 MILANO
Бренд: Baninni Страницы: 5
Bailey infi 90 IMMFP12 Instruction preview
infi 90 IMMFP12
Бренд: Bailey Страницы: 75
mr. steam iSteam 2.0 Control Installation, Operation & Maintenance Manual preview
iSteam 2.0 Control
Бренд: mr. steam Страницы: 16
Sygonix 2446222 Operating Instructions Manual preview
2446222
Бренд: Sygonix Страницы: 12
LMI Technologies Liquitron DP5000-01A Instruction Manual preview
Liquitron DP5000-01A
Бренд: LMI Technologies Страницы: 28
Motrona CA306 Operating Manual preview
CA306
Бренд: Motrona Страницы: 10
Pilz PSS67 IO1 16FDI Operating Manual preview
PSS67 IO1 16FDI
Бренд: Pilz Страницы: 36
SDC E4KP ENTRYCHECK Operating Instructions Manual preview
E4KP ENTRYCHECK
Бренд: SDC Страницы: 6
Nautronic NAUCON-40 User Manual preview
NAUCON-40
Бренд: Nautronic Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды