manualshive.com logo in svg

GE D30 series, Инструкция по эксплуатации

Инструкция по эксплуатации GE D30 Series доступна для бесплатного скачивания на нашем сайте. Получите необходимый руководство в формате PDF и ознакомьтесь с подробными инструкциями по использованию вашего устройства. Не забудьте скачать руководство с manualshive.com.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

5-23

5

FAILED AUTHENTICATE

 — If this setting is Enabled then the number of failed authentications is compared with the Session 

Lockout threshold. When the Session Lockout threshold is exceeded, this minor alarm indication comes up.

FIRMWARE LOCK

 — If this setting is Enabled, then any firmware upgrade operation attempt when the Lock Relay setting is 

enabled brings up this self test alarm.

SETTINGS LOCK

 — If this setting is Enabled then an unauthorized write attempt to a setting for a given role activates this self 

test.

SETTINGS 

 PRODUCT SETUP 

 SECURITY 



 SUPERVISORY 

 SELF TESTS

 

 FAILED AUTHENTICATE

CyberSentry setup

When first using CyberSentry security, use the following procedure for setup.
1.

Log in to the relay as Administrator by using the 

VALUE

 keys on the front panel to enter the default password 

"ChangeMe1#". Note that the Lock Relay setting needs to be disabled in the 

Security > Supervisory

 menu. When this 

setting is disabled, configuration and firmware upgrade are possible. By default, this setting is disabled.

2.

Enable the Supervisor role if you have a need for it.

3.

Make any required changes in configuration, such as setting a valid IP address for communication over Ethernet.

4.

Log out of the Administrator account by choosing None.

5.

Next, Device or Server authentication can be chosen on the login screen, but the choice is available only in EnerVista. 
Use Device authentication to log in using the five pre-configured roles (Administrator, Supervisor, Engineer, Operator, 
Observer). When using a serial connection, only Device authentication is supported. When Server authentication is 
required, characteristics for communication with a RADIUS server must be configured. This is possible only in the 
EnerVista software. The RADIUS server itself also must be configured. The appendix called RADIUS Server at the end of 
this instruction manual gives an example of how to set up a simple RADIUS server. Once both the RADIUS server and 
the parameters for connecting the UR to the server have been configured, you can choose Server authentication on 
the login screen of EnerVista.

To configure Server authentication:
1.

In the EnerVista software, choose Device authentication and log in as Administrator.

2.

Configure the following RADIUS server parameters: IP address, authentication port, shared secret, and vendor ID.

3.

On the RADIUS server, configure the user accounts. Do not use the five pre-defined roles as user names (Administrator, 
Supervisor, Engineer, Operator, Observer) in the RADIUS server. If you do, the UR relay automatically provides the 
authentication from the device.

4.

In the EnerVista software, choose Server authentication and log in using the user name and password configured on 
the RADIUS server for Server authentication login.

FIRMWARE LOCK:

Enabled

Range: Enabled, Disabled

SETTINGS LOCK:

Enabled

Range: Enabled, Disabled

FAILED

AUTHENTICATE

FAILED AUTHENTICATE:

Enabled

Range: Enabled, Disabled

The use of CyberSentry for devices communicating through an Ethernet-to-RS485 gateway is not 
supported. Because these gateways do not support the secure protocols necessary to communicate 
with such devices, the connection cannot be established. Use the device as a non-CyberSentry 
device.
Users logged in through the front panel are not timed out and cannot be forcefully logged out by a 
supervisor. Roles logged in through the front panel that do no allow multiple instances (Administrator, 
Supervisor, Engineer, Operator) must switch to None (equivalent to a logout) when they are done in 
order to log out.
For all user roles except Observer, only one instance can be logged in at a time, for both login by front 
panel and software.

Содержание D30 series















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D30 series

Samson 430 Series Mounting And Operating Instructions preview
430 Series
Бренд: Samson Страницы: 78
Rachio 3 Get Started preview
3
Бренд: Rachio Страницы: 16
Canon imageRUNNER ADVANCE C9075S PRO User Manual preview
imageRUNNER ADVANCE C9075S PRO
Бренд: Canon Страницы: 20
Datalogic DX8200 Quick Reference Manual preview
DX8200
Бренд: Datalogic Страницы: 15
Fagor CNC 8070 Original Instructions Manual preview
CNC 8070
Бренд: Fagor Страницы: 10
Fagor CNC 8070 Operating Manual preview
CNC 8070
Бренд: Fagor Страницы: 358
Fagor CNC 8070 Programming Manual preview
CNC 8070
Бренд: Fagor Страницы: 556
Fagor CNC 8060 Operating Manual preview
CNC 8060
Бренд: Fagor Страницы: 172
Fagor CNC 8060 Translation Of The Original Manual preview
CNC 8060
Бренд: Fagor Страницы: 180
Fagor CNC 8060 Hardware Configuration preview
CNC 8060
Бренд: Fagor Страницы: 112
FaderMate Master Control Unit Fittings Manual preview
Master Control Unit
Бренд: FaderMate Страницы: 36
VAT 150 Series Installation, Operating, & Maintenance Instructions preview
150 Series
Бренд: VAT Страницы: 27
Idemia MorphoAccess SIGMA Extreme Series Quick User Manual preview
MorphoAccess SIGMA Extreme Series
Бренд: Idemia Страницы: 31
ICP DAS USA ET-7000 series User Manual preview
ET-7000 series
Бренд: ICP DAS USA Страницы: 148
ICMA S001 Technical Information Sheet preview
S001
Бренд: ICMA Страницы: 8
Vaillant VRT 340f Operating Instruction preview
VRT 340f
Бренд: Vaillant Страницы: 32
Vaillant VRT 330 Manual preview
VRT 330
Бренд: Vaillant Страницы: 27
Vaillant VRC 470 Operating Instructions Manual preview
VRC 470
Бренд: Vaillant Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды