GE CGA 351, Руководство пользователя

Страница: 34 / 133

December 2004
3-6 Operation
Configuration Options
(cont.)
Note:
The
[0:Analog Output]
,
[2:Alarm-1]
,
[2:Alarm-2]
,
[2:Alarm-3]
and
[2:Alarm-4] options
are also available in the above box.
To select the desired output(s) from the previous list box, complete
the following steps:
1.
Use the [ ] and [ ] keys to highlight a specific output. For this
example, make sure that
[0: Display]
is selected as one of the
outputs.
2.
Use the [ ] and [ ] keys to select “Add” or “Remove” and press
the
[ENTER]
key to change the status of the selected output. An
output is selected if an asterisk (*) appears to its left.
3.
When all of the desired outputs have been selected, use the [ ] and
[ ] keys to select
“OK” and press the
[ENTER]
key.
Notice that the newly configured display shows the slot number and
the input parameter on the top line, and the current live value along
with the unit type are displayed in the center of the screen.
Note:
See “The [Opt-User] Menu” on page 4-15 for instructions on
how to adjust the display contrast.
Switching Display
Windows
After the display has been configured, the meter actually maintains
multiple display windows. Although only one window can be
displayed at any given time, it is easy to switch to one of the other
windows via the
User Program . Enter the User Program by pressing
the
[ESC]
key.
1 Oxygen Press
[ESC]
four times to return
the display to the actual set
configuration.
2.71
ppm
POWER ESC ENTER
Cfg Cal Opt Disp Notice that the fourth option,
[Disp]
, is now available. Use
the [ ] and [ ] keys to select
[Disp]
and press
[ENTER]
.
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com