GE CGA 351, Руководство пользователя

Страница: 64 / 133

Setup and Calibration 4-25
December 2004
Setting the Display
Backlight
To set the LCD display backlight, enter the User Program , as
described on page 4-1, and proceed as follows:
Note:
The
[Lock All]
and
[Versions]
options are also available in the
above list box.
Note:
The [Fault Alarm] and [Comm] options are also available in
the above list box.
Note:
If
[Off]
or
[On]
was selected, the following prompt does not
appear. If
[Timed]
was selected, enter a value below for the
length of time without keypad activity that the backlight will
be turned “Off” until further keypad activity is detected.
This completes the adjusting of the display backlight. Either press
[ESC]
until you exit the User Program or continue programming.
Cfg Cal Opt Disp Use the [ ] and [ ] keys to
select
[Opt]
. Then, Use the [ ]
and [ ] keys to select
[User]
and press
[ENTER]
.
User
Setup
Lock Menus
POWER ESC ENTER
User Use the [ ] and [ ] keys to
select
[Backlight]
and press
[ENTER]
.
Analog Output
Contrast
Backlight
POWER ESC ENTER
User Backlight Use the [ ] and [ ] keys to
select the desired option and
press
[ENTER]
.
Off
On
Timed
POWER ESC ENTER
User Backlight Timed
Use [ ] and [ ] to position the
cursor under each character.
Use [
] and [ ] to increment
the value of each so the total
number is between 00 and 99.
When done, press
[ENTER]
.
Minutes
00
s
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com