GE CGA 351, Руководство пользователя

Страница: 60 / 133

Setup and Calibration 4-21
December 2004
Testing the Analog Output
Enter the analog output setup menu, as described on page 4-16, and
proceed as follows:
Note:
The
[Aout Type], [Zero Trim]
and
[Span Trim]
options are also
available in the above list box.
At the next prompt, enter the desired “Test Percent” value, which is
the analog output value (expressed as a percent of the analog output
span) used by the meter as a
TEST
signal.
The meter now automatically returns to the “Analog Output” prompt.
Either press
[ESC]
until you exit the User Program or proceed to the
appropriate section to continue setting up the analog output.
User Aout Use the [ ] and [ ] keys to
select
[Test]
, and press
[ENTER]
.
Zero Setpoint
Span Setpoint
Test
POWER ESC ENTER
User Aout Aout-Test Use [ ] and [ ] to increment
the value. Press
[ENTER]
when
done.
Test Percent
s
0 t
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com