GE CGA 351, Руководство пользователя

Страница: 43 / 133

December 2004
4-4 Setup and Calibration
Setting the Trip Type
(cont.)
Note:
The
[Below with Fault]
option is also available in the above
list box.
The meter now automatically returns to the “Alarm-Features”
prompt. Either press
[ESC] until you exit the User Program or
proceed to the appropriate section to continue setting up the alarms.
Setting the Trip Value
Enter the alarm setup menu (see page 4-2) and proceed as follows:
Note:
The
[Test]
and
[Fail-Safe]
options are also available in the
above list box
At the next prompt, enter the desired trip point value.
The meter now automatically returns to the “Alarm-Features”
prompt. Either press
[ESC]
until you exit the User Program or proceed
to the appropriate section to continue setting up the alarms.
Alarms A..Trip-Type Use the [ ] and [ ] keys to
select the desired trip type, and
press
[ENTER]
.
Above
Below
Above with Fault
POWER ESC ENTER
Alarms..Alarm-Feat Use the [ ] and [ ] keys to
select
[Trip Value]
, and press
[ENTER]
.
Trip Type
Trip Value
Deadband Value
POWER ESC ENTER
Alarms..Trip Value Using the [ ] and [ ] keys,
position the cursor under the
desired character. Then, use
the [
] and [ ] keys to incre-
ment the value. When done,
press
[ENTER]
.
ppm
000.00
s
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com