GE CGA 351, Руководство пользователя

Страница: 45 / 133

December 2004
4-6 Setup and Calibration
Testing the Alarm Relays
Enter the alarm setup menu, as described on page 4-2. To verify that
the alarm relay is functioning properly, the alarm may be operated
manually as follows:
Note:
The
[Trip Type]
and
[Fail-Safe]
options are also available in
the above list box.
The following options are available in the [
TEST]
submenu:
•
Normal: sets the alarm relay to its proper state, as dictated by the
current live measurment value.
IMPORTANT:
Always return the alarm relay to this state at the
conclusion of the testing.
•
Trip: manually triggers the alarm relay to its “ON” state.
•
Reset: manually returns the alarm relay to its “OFF” state.
The meter now automatically returns to the “Alarm-Features”
prompt. Either press
[ESC]
until you exit the User Program or proceed
to the appropriate section to continue setting up the alarms.
Alarms..Alarm-Feat Use the [ ] and [ ] keys to
select
[Test]
, and press
[ENTER]
.
Trip Value
Deadband Value
Test
POWER ESC ENTER
Alarms..Alarm-Test Use the [ ] and [ ] keys to
select the desired
TEST
option.
Press
[ENTER]
when done.
Normal
Trip
Reset
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com