GE H
EALTHCARE
D
IRECTION
5141177-100, R
EVISION
14
B
RIGHT
S
PEED
E
LITE
, E
DGE
, E
XCEL
: P
RE
-I
NSTALLATION
Appendix A – Alternate Cover Removal Options
Page 159
A -
Covers
Appendix A
Alternate Cover Removal Options
Section 1.0
Alternate Cover Removal Options
1.1
Overview
The room dimensions and clearance dimensions shown in this manual assume a room
configuration in which the front and rear gantry covers are removed and stored straight back/
forward from the gantry. However, not all room configurations are the same, meaning covers can
be stored in other available spaces. For example, some rooms are long and skinny, while other
rooms are short and wide. Some rooms may have a support column in the way, while other rooms
have an adjacent room to store the gantry covers. For this reason, some alternative cover removal
options for different room configurations are presented in this appendix.
1.2
Front Cover Removal
Rather than storing the front cover straight forward from the gantry at the foot of the table, the
cover
can be moved and stored on the right or left side of the table if there is space available while
still
maintaining service access to the table. Additionally, the cover can be moved out of the scan
room
to a temporary storage location.
The standard procedure for removing the front cover is with the table all the way down. A second
method for front cover removal is with the table partially raised and the cradle moved into the bore
of the gantry. Under this method, the minimum length of the room can be reduced by 508 mm (20
in.)
NOTICE
A room size that utilizes the table-up cover removal method has severe limitations in space for
patient care and work flow. The map and dimensions shown in this manual depict the required
clearances for proper equipment operation and service only. The customer/purchaser is responsible
for federal, state and/or local codes regarding facility egress and related facility requirements.
Содержание BrightSpeed Elite
Страница 169: ...CT...
Страница 170: ...170 www gehealthcare com...