GE AKTA avant, Начало работы

Страница: 61 / 134

Action Step
In the Phase Properties pane of the Method Settings phase, click the Start
Protocol button if you wish to include a start protocol. 5
Result: The Start Protocol dialog opens.
In the Start Protocol dialog:
•
Select items to display at method start. Result Name and Location is
selected by default.
•
Click OK to confirm and close the dialog.
Select the next phase in the Method Outline pane by clicking it, and choose
appropriate parameter values in the Phase Properties pane. 6
Repeat step 6 until all phases are edited. 7
TIP:
If the instrument will not be used for a couple of days or
longer, add one or several System CIP phases to the end
of the method as described below.
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB 61
6 Create a method
6.1 Guide to method creation
6.1.1 Create and edit methods