GE AF-600 FP Series, Руководство по эксплуатации

Страница: 83 / 138

6.1.7 Changing a Text Value
If the selected parameter is a text value, change the text
value by means of the up/down navigation keys.
The up key increases the value, and the down key
decreases the value. Place the cursor on the value to be
saved and press [OK].
Illustration 6.9 Display example.
Choose a parameter group from the Main Menu and Press
[OK]. Then further select the parameter sub-groups by
using the up and down arrows and then Press [OK].
The middle section of the keypad display shows the
parameters. Press [OK] to select parameters and now the
display shows that selected parameter's value.
Illustration 6.10 Display example.
6.1.8 Changing a Group of Numeric Data
Values
If the chosen parameter represents a numeric data value,
change the chosen data value by means of the [
◄
] and [
►
]
navigation keys as well as the up/down [
▲
] [
▼
] navigation
keys. Use the
◄
] and [
►
] navigation keys to move the
cursor horizontally.
Illustration 6.11 Display example.
Use the up/down navigation keys to change the data
value. The up key enlarges the data value, and the down
key reduces the data value. Place the cursor on the value
to be saved and press [OK].
Illustration 6.12 Display example.
6.1.9 Changing of Data Value, Step-by-Step
Certain parameters can be changed step by step or
infinitely variably. This applies to
P-07 Motor Power [kW] ,
F-05 Motor Rated Voltage and F-04 Base Frequency .
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely variably.
6.1.10 Read-out and Programming of
Indexed Parameters
Parameters are indexed when placed in a rolling stack.
ID-30 Alarm Log: Error Code to ID-32 Alarm Log: Time
contain a fault log which can be read out. Choose a
parameter, press [OK], and use the up/down navigation
keys to scroll through the value log.
Use C-05 Multi-step Frequency 1 - 8 as another example:
Choose the parameter, press [OK], and use the up/down
navigation keys keys to scroll through the indexed values.
To change the parameter value, select the indexed value
and press [OK]. Change the value by using the up/down
keys. Press [OK] to accept the new setting. Press [Cancel]
to abort. Press [Back] to leave the parameter.
How to Program AF-600 FP High Power Operating Instructions
82
6 6