CHAPTER 3: USER INTERFACES
CONNECTING ENERVISTA 369 SETUP TO THE RELAY
369 MOTOR MANAGEMENT RELAY – QUICKSTART GUIDE
3–21
3.3
Connecting EnerVista 369 Setup to the Relay
3.3.1
Configuring Serial Communications
Before starting, verify that the serial cable is properly connected to either the RS232 port
on the front panel of the device (for RS232 communications) or to the RS485 terminals on
the back of the device (for RS485 communications).
This example demonstrates an RS232 connection. For RS485 communications, the GE
Multilin F485 converter will be required. Refer to the F485 manual for additional details. To
configure the relay for Ethernet communications, see
Z
Install and start the latest version of the EnerVista 369 Setup
software (available from the GE enerVista CD).
See the previous section for the installation procedure.
Z
Click on the
Device Setup
button to open the Device Setup window.
Z
Click the
Add Site
button to define a new site.
Z
Enter the desired site name in the
Site Name
field.
If desired, a short description of site can also be entered along with
the display order of devices defined for the site. In this example, we
will use “Substation 1” as the site name.
Z
Click the
OK
button when complete.
The new site will appear in the upper-left list in the EnerVista 369 Setup window.
Z
Click the
Add Device
button to define the new device.
Z
Enter the desired name in the
Device Name
field and a description
(optional) of the site.
Z
Select “Serial” from the Interface drop-down list.
This will display a number of interface parameters that must be
entered for proper RS232 functionality.
Содержание 369
Страница 8: ...1 4 369 MOTOR MANAGEMENT RELAY QUICKSTART GUIDE ORDERING CHAPTER 1 INTRODUCTION...
Страница 18: ...2 14 369 MOTOR MANAGEMENT RELAY QUICKSTART GUIDE ELECTRICAL INSTALLATION CHAPTER 2 INSTALLATION...
Страница 76: ...5 72 369 MOTOR MANAGEMENT RELAY QUICKSTART GUIDE SPECIFICATIONS CHAPTER 5 PRODUCT DESCRIPTION...