GE 369, Быстрый старт

Страница: 22 / 76

3–18 369 MOTOR MANAGEMENT RELAY – QUICKSTART GUIDE
ENERVISTA 369 SETUP INTERFACE CHAPTER 3: USER INTERFACES
3.2 EnerVista 369 Setup Interface
3.2.1 Hardware and Software Requirements
The following minimum requirements must be met for the EnerVista 369 Setup software to
operate on your computer.
• Pentium class or higher processor (Pentium II 300 MHz or better recommended)
• Microsoft Windows 95, 98, 98SE, ME, NT 4.0 (SP4 or higher), 2000, XP
• 64 MB of RAM (256 MB recommended)
• Minimum of 50 MB hard disk space (200 MB recommended)
If EnerVista 369 Setup is currently installed, note the path and directory name. It may be
required during upgrading.
The EnerVista 369 Setup software is included on the GE enerVista CD that accompanied
the 369. The software may also be downloaded from the GE Multilin website at
http://
www.GEindustrial.com/multilin .
3.2.2 Installing EnerVista 369 Setup
After ensuring these minimum requirements, use the following procedure to install the
EnerVista 369 Setup software from the enclosed GE enerVista CD.
Z Insert the GE enerVista CD into your CD-ROM drive.
Z Click the Install Now button and follow the installation instructions
to install the no-charge enerVista software on the local PC.
Z When installation is complete, start the enerVista Launchpad
application.
Z Click the IED Setup section of the Launch Pad window.
Z In the enerVista LaunchPad window, click the Add Product button
and select the “369 Motor Management Relay” as shown below.
Select the “Web” option to ensure the most recent software release,
or select “CD” if you do not have a web connection, then click the
Add Now button to list software items for the 369.