GE Multilin DTP-B, Инструкция по эксплуатации

Страница: 60 / 90

11. KEYBOARD AND DISPLAY
GEK-106243E DTP Digital Transformer Protection 11-7
These are the steps to be taken in order to change any setting:
1. Press the SET key.
2. Select the option MODIFY SETTINGS.
3. Select the required setting in the menu trees.
4. ENTER the value to be modified (or select the required value from the list of available settings using
LEFT/RIGHT ARROW keys).
5. Press the ENT key. If you wish to change another setting in the same group, repeat steps 3 to 5.
6. Press the END key.
The relay will request confirmation of the change displaying the following message:
7. If you want to confirm this change press the 1/Y key. (If not, press 3/N).
8. The relay will then show the following message on the screen:
9. Press the CLR key repeatedly in order to return to the initial screen.
If the setting entered is outside the limits of the range allowed for that setting, the relay will not accept the change
and will show the following message:
Some settings do not require you to key in a numeric value, but to choose an option from a series of possibilities.
In this case the options can be viewed using the LEFT/RIGHT ARROW keys.
CONFIRM?
(Y/N)
SETTINGS CHANGE
EXECUTED
SETTING
OUT OF RANGE