GDS Compuprint 2056 страница 55 Скачать руководство пользователя

Страница: 55 / 68

User Manual 2056

MAN10xxx-01 47

Alignment adjustment includes normal print mode adjustment and copy mode adjustment.

Alignment test and adjusting procedure of normal mode adjustment:

1. Turn on the printer, and then install 80 columns tractor paper correctly.

2. In the online mode, press and hold on the

LOAD/EJECT

key and

TEAR

key until the

PAPER OUT

and

ONLINE

LEDs blink simultaneously, the printer enters the alignment

adjust mode and print out the DPI alignment setting.

3. After entering the alignment adjust mode, press

the following keys to adjust the degree

of make columns:

EJECT/LOAD

Each press on this key, the even line would move left with one step

(the adjusted value is increased)

Press

ONLINE

key to check the result.

LF/FF

Each press on this key, the even line would move right with one step (the

adjusted value is decreased)

Press

ONLINE

key to check the result.

TEAR

Switch to the next DPI adjust state

ONLINE

Store and print the current settings

4. Restart the printer and exit the alignment adjust mode.

Alignment test and adjusting procedure of copy mode adjustment:

1. Turn on the printer, and then install 80 columns tractor paper correctly.

2. In the online mode, press and hold on the

LF/FF

key and

TEAR

key until the

PAPER

OUT

and

ONLINE

LEDs blink simultaneously, the printer enters the alignment adjust

mode and print out the DPI alignment setting.

3. After entering the alignment adjust mode, press

the following keys to adjust the degree

of make columns:

EJECT/LOAD

Each press on this key, the even line would move left with one step

(the adjusted value is increased)

Press

ONLINE

key to check the result.

LF/FF

Each press on this key, the even line would move right with one step (the

adjusted value is decreased)

Press

ONLINE

key to check the result.

TEAR

Switch to the next DPI adjust state

ONLINE

Store and print the current settings

4. Restart the printer and exit the alignment adjust mode.

Note: Alignment adjust mode would affect the printing quality, think it over

before adjusting and be strict to the instructions while adjusting.

Содержание Compuprint 2056





































































Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды

GDS Compuprint 2056, Руководство пользователя

Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды