manualshive.com logo in svg

GDS Compuprint 2056, Руководство пользователя

Поделиться
Скачать
GDS Compuprint 2056 Скачать руководство пользователя страница 32

User Manual                                                                                                                                      2056 

MAN10xxx-01 24 

2.4.2 In the Cut Sheet Mode 

LF/FF

 

If the paper is at the print position in the offline mode, press the 

LF/FF

 key (less than 0.5 

second), the printer would feed the paper one line based on the current line spacing setting. 

Alternatively, hold the 

LF/FF

 key down, the printer would eject the paper until the cut sheet is 

entirely ejected. 

 

LOAD/EJECT

 

If the paper is at the print position in the offline mode, press the 

LOAD/EJECT 

key, the paper 

would be entirely ejected from the printer. 

 

ONLINE

 

If the printer has loaded paper in the offline mode, press the key to enter 

ONLINE

 mode, the 

ONLINE

 LED is on and the printer enters the print mode. 

Press this key in the online mode, the printer is offline, 

ONLINE 

LED blinks and the printer 

can not print. 

 

2.4.3 Print Speed 

The setting method of the print speed: 
In offline mode, press the SPEED key to switch the print mode among Normal Speed mode, 

High Speed mode and Super High Speed mode. The green LED denotes normal speed 

mode, the yellow one denotes the high speed mode and the red one denotes the super high 

speed mode. 

 

2.4.4 Copy Setup Mode 

Printer will turn on the Copy mode automatically when the gap adjust lever is set to 3 (or 

higher).  
In order to improve the copy definition when using multi-ply paper, you can select the copy 

capability through the following steps: 
1. In Online mode, long press SPEED key + TEAR key for about 3 seconds, after the printer 

beeps three times, the PAPER OUT LED and ONLINE LED blink at the same time, and the 

printer would present one beep every one or two seconds which indicates the printer has 

entered Copy setup mode. 

2. The SPEED LED indicates the current Copy setup mode: 
  Green denotes the quiet mode; Orange denotes the normal mode and Red denotes the 

copy mode. 

3. In Copy setup mode, press LF/FF key can switch the printer among quiet mode, normal 

mode and copy mode. 

4. After setting the Copy setup mode. Long press SPEED key + TEAR key for about 3 

seconds, the printer beeps 3 times, which indicates the printer saves the setting and exits 

the Copy setup mode. 

5. You could also set Copy setup mode through driver or menu setup mode. (See details in 

User's Manual) 

 

2.4.5 Micro-Adjust of the Printing Home Position and the Tear Position 

Operation steps of adjusting the printing home position: (the printing home position of cut 

sheet is separated with that of the tractor paper. The following uses tractor paper as an 

example) 

Содержание Compuprint 2056





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды