GDS Compuprint 2056, Руководство пользователя

Страница: 4 / 68

User Manual Compuprint 2056
MAN10xxx-01 ii
Important Safety Instructios
Read all of these instructions carefully and thoroughly and save them for later
reference. The unauthorized operation would lead to malfunction or accident.
Manufacturers have no responsibilities for the problems which are led by
unauthorized operations.
1.
Follow all warnings and instructions in the manual as well as marked on the product.
2.
If the printer has just been used, please do not touch the print head for overheating.
3.
Do not put your fingers under the left and right tractor sprocket covers of the tractor when
installing the tractor paper.
4.
Unplug this product from the power outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5.
Do not use this product near water.
6.
Do not place this product on an unstable cart, stand or table. The product may fall, causing
serious damage to you or to the product.
7.
Slots and openings on the cabinet and the back or bottom are provided for air ventilation. To
ensure reliable operation of the product and to protect it from overheating, do not block or
cover these openings. The openings should never be blocked by placing the product on a
bed, sofa, rug or other similar surface. This product should never be placed near or over a
radiator or heater. This product should not be placed in a built-in installation or kiosk stand
unless proper ventilation is provided.
8.
This product should never be placed near or over a radiator or heat origin, and should avoid
of direct sunshine.
9.
Do not locate this product where the cord would be walked on. When the cord or the plug is
mangled, please stop using and get a new one replaced. Make sure the old one is far away
from the printer, so it can avoid someone who does not know the inside story getting
damage.
10.
Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust
may cause equipment damage or fire.
11.
Never push objects of any kind into this product though cabinet slots as they may touch
dangerous voltage dots or short out parts.
12.
Don’t remove the printer’s out-cover and repair the printer. When needed, call or take it to
the professional.
13.
To ensure safety, please unplug this product prior to leaving it unused for an extended
period. The wall outlet you plan to connect to should be nearby and unobstructed.
14.
This product belongs to the impact printer; it produces obviously noise during printing, so we
suggest placing this printer in a relatively independent area.
15.
When using the printer in room where ventilation is not good or printing a large amount of
files, it is suggested to change the air in time.
16.
Unplug this product from the power outlet and leave servicing to qualified service personnel
under the following conditions: