GDS Compuprint 2056 Скачать руководство пользователя

Страница: 22 / 68

User Manual 2056

MAN10xxx-01 14

1) Correlative description for IP address settings

In order to search and set printer’s IP address conveniently for the first time, the factory

default setting is DHCP mode which assigns IP address dynamically. If there is no

DHCP server in the connected LAN and printer is set to DHCP mode as well, then it

would use the internal pre-set address (IP: 10.0.0.1, Subnet Mask: 255.255.255.0)

automatically.

It is suggested that printer’s IP set to static in actual usage, which can cut down the time

when initializing the Ethernet interface as the printer is turned on and prevent IP

conflicts (The dynamic address used in printer may conflict with another one). The

network segment part of the IP address and Subnet Mask must be the same as those of

PC connecting with a printer. For example, the address of working PC is

192.168.0.1/255.255.255.0 (IP/Subnet Mask),then which of printer should be set to

192.168.0.x/255.255.255.0

（

x=2~254 and should avoid the IP in used. It is not

restricted for NetFinder to search printers in the same network but different segment

parts (can not stride gateway). Relative glossary of IP address may refer to

corresponding information.

2) Setting printer’s IP address

Select the printer information to be modified (black frame appears), click "Assign IP" key.

Set the IP in the dialogue box appearing.

Check the “Use DHCP” if need to assign dynamic address, the settings above would be

disabled automatically. Please make sure there is a DHCP server in the network, or the

printer can not receive an effective IP address.

When to specify static address, uncheck “Use DHCP” and fill in “IP address”, “Subnet

Mask” and “Default Gateway”. If there is no gateway in the network, fill 255.255.255.255

in the “Default gateway”. “IP address” and “Subnet Mask” should obey the assigning

rules of local LAN (Ethernet), please enquire the administrator of networks which the

printer connects to for more details.
Click “OK” to send address setting information to the specified printer. Click “Cancel” if

you abandon the modification.
Click “Search” in the main interface again to update printer information after modifying

the printer’s IP address.

Содержание Compuprint 2056





































































Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды

GDS Compuprint 2056, Руководство пользователя

Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды