GDS Compuprint 2056 страница 19 Скачать руководство пользователя

Страница: 19 / 68

User Manual 2056

MAN10xxx-01 11

(2) The installing steps with the USB cable:

USB driver installing steps:

1. Connect with the USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, a window of “Add New

Hardware Wizard” pops up, click “Next”.

3. A window of “Add New Hardware Wizard” — “Windows operation” pops up, choose

“Search the best driver for the device (recommended)”, and click “Next”.

4. A window of “Search for new drivers” pops up, check “Specify a location”, click

“Browse”, select the path as follows: CD

→

ROM

→

“Drivers”-“[WIN98 (WINME) \

USBdriver]”, then click “OK”.

5. Return to the window of “Add New Hardware Wizard”, click “Next”; a window of

“Windows driver file search for the device” pops up, click “Next”.

6. After the system finishing installing the file automatically, a window of “USB Print

Supported” pops up, click "Finish".

7. The printer USB driver process is installed successfully.

USB printer driver installing steps:

1. Click “Start”

→

“Settings”

→

“Printers”.

2. Click “Add Printer”, then a window of “Add Printer Wizard” pops up, click “Next”.
3. A window of “Click the manufacturer and model of your printer” pops up, click “Have

Disk...”, please click “Browse”, select the path as follow: CD-ROM

→

“Drivers”

→

“WIN98 (WINME)”, and then click “OK”.

4. A window of “Install From Disk” pops up, click “OK”, return to the window of “Add

Printer Wizard”, then click "Next".

5. A window of “Printer port” pops up, select “Available ports”, select “JMUSB”, click

"Next", and then show the printer’s name. If the system is not installed by other printer

driver process, the printer is treated as default printer by the application process of

Window98 environment, click “Next”. Otherwise according to prompt, choose the printer

is default: "Yes", click "Next" choose “Yes-(recommended)”, click “Finish”. A window of

“Printer test page completed” pops up, click “Yes”.

6. The printer driver process is installed successfully.

Note: 1. As the system of Windows 98/ME doesn’t have integrated USB driver

control, please install USB driver before using USB interface printing.
Then install USB printer driver.

2. If it has installed the USB driver, please install the USB printer driver

directly as the following steps.

Содержание Compuprint 2056





































































Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды

GDS Compuprint 2056, Руководство пользователя

Результаты поиска

Содержание Compuprint 2056

Отзывы:

Похожие инструкции для Compuprint 2056

Бренды по названию

Популярные бренды