46
12.2. Inserting the object holder
The described procedure is the same for all object holders.
OBSERVE THE SAFETY INSTRUCTIONS!
•
Hold the object holder from the side.
•
Place an object holder with the front side forward inside the scanner.
The protrusions (“Ovals”) on the underside of the object holder engage with the recesses of the Multisplit base
plate.
The object holder will adhere to the magnet of the Multisplit base plate.
•
Check whether the object holder can be shifted easily. If this is the case, correct the fit until the object holder
fits securely.
12.3. Removing the object holder
The described procedure is the same for all object holders. To fasten an object to the object holder, you should always
remove the object holder from the scanner.
•
Hold the adapter plate on both sides; if necessary, use both hands.
•
Carefully pull the object holder upwards. A certain amount of force is required due to the magnetic attraction.
The object holder is released from the Multisplit base plate.
Upon removal, the rotary axis may be moved unintentionally. For this situation, Aadva Scan features a function to drive
the axes back into the service position.