34
REMOVING THE OBJECT HOLDER
The described procedure is the same for both object holders. To fasten a jaw model to the object holder, you should
always remove the object holder from the scanner.
•
Hold the adapter plate on both sides; if necessary, use both hands.
•
Carefully pull the object holder upwards. A certain amount of force is required due to the magnetic attraction.
The object holder is released from the Multisplit base plate.
Upon removal, the rotary axis may be moved unintentionally. For this situation, Aadva Scan features a function to drive
the axes back into the service position.
7.4. Fastening gingiva, squeeze bites, scanbodies or wax-ups
•
To scan gingiva, squeeze bites, scanbodies or wax-ups, fasten the small prosthetic parts to the jaw model
according to the prosthetics manufacturer’s instructions.
•
Tighten the scanbodies firmly.
•
Fasten the prepared jaw model to an object holder or a mounting plate for your articulator.
As a rule, no further fixation is required. Loosely placed parts can be glued slightly in two places with a removable
adhesive if required.
