32
•
Carefully pull the adapter plate upwards. A certain amount of force is required due to the magnetic attraction.
The adapter plate is released from the Multisplit base plate.
The axes can be moved unintentionally during removal. For this situation, Aadva Scan features a function to drive the
axes back into the service position.
7.3. Inserting a jaw model with an object holder
OVERVIEW
Object holder with knurled screw
1. Rear
2. Front
3. Floating stop
4. Hook
5. Threaded pins
6. Knurled screw with clockwise thread
7. Adesso Split® plastic plate with adhesive disk
3
4
5
7
6
5
4
1
2
1. Front
2. Rear
3. Top
4. Magnetic points
5. Adesso Split® plastic plate with adhesive disk
1
2
3
4
5
FASTENING A JAW MODEL ONTO AN OBJECT HOLDER
The object holders of the ALS 2 to fasten a jaw model mechanically. This method is to be applied to jaw models which
are not plastered.
Object holder with knurled screw
Different sizes of jaw models can be fastened securely to the object holder with the knurled screw.
OBSERVE THE SAFETY INSTRUCTIONS!
•
Place the jaw model (upper or lower jaw) with the bottom side on the object holder.
•
If required, loosen the knurled screw to increase the space.
The anterior teeth point in direction of the knurled screw.
•
Press the jaw model gently against the threaded pins.
•
Tighten the knurled screw.
The jaw model is placed correctly if it is flush with the floating stop and the threaded pins.