28
6.2. Matting the surface with 3D scan spray
Reflective or dark surfaces must be matted with 3D scan spray before being scanned.
GC recommends that only products with extra-fine grain size and suitability for dental technology be used.
•
Follow the instructions of the manufacturer regarding application, safety and material compatibility.
•
If the 3D scan spray has to be sprayed in the work area, cover the scanner previously.
This way, you protect the sensitive optical and the electronic components from damaging dusts.
Never spray into the inside of the scanner.
•
Fasten the model or object to the object holder before spraying.
•
Spray according to the instructions as targeted as possible onto the model or object.
•
When inserting, make sure not to touch the spray layer.
•
After scanning, remove the spray residue from the object holder and model or object.
Follow the instructions of the manufacturer for this as well.
