39
Aadva Lab Scanner 2
Manual
10. Positioning tooth stump models with
the Multi die adapter
You can position up to twelve tooth stump models individually with the Multi die adapter.
You can use the Multi die adapter for the two modules Multi die and Multi case.
It is included in the scope of delivery for the ALS 2.
OVERVIEW
1. Adesso Split® plastic plate
with adhesive disk
2. Slots
3. Flat side (front)
Numbering of the slots
FASTENING TOOTH STUMP MODELS
To ensure that the tooth stump models sit firmly on the Multi die adapter, you require the adhesive pads as fixing
material.
Two packs of adhesive pads are included in the scope of delivery. As replacement you can use commercially available
adhesive glue pads. These should be extra strong and removable, not coloring nor hardening.
•
Fill all slots with adhesive pads.
The glue material should fill the slots up to their edge, but nor protrude from them. The glue material can remain
in the slots permanently.
•
Insert the metal pins of the tooth stump models into the slots.
Correct fastening
The prepared tooth stump models are fastened correctly if:
– they are straight (not tilted)
– they have no contact with their neighbor
– they lie on the Multi die adapter – in other words, insert the metal pins as deep as possible into the glue material
– they remain in their position when the Multi die adapter is rotated or tilted.
It is of advantage, but not a precondition, to insert the tooth stump models such that the buccal side faces outwards.
3
1
2
