F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 1 - 13
Safety
Ensure the roll of mount adhesive is
loaded properly on the unwind shaft.
Exposed adhesive should be
facing away from the rollers.
This will prevent hours of roll cleaning!
CAUTION
W A R N I N G
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
Y o u c a n b e C R U S H E D o r B U R N E D !
If the thickness of the substrate is not
known, follow the procedure to manually
set the nip in Section 5.5.1 Manually nip
adjustment.
INFORMATION
W A R N I N G
Keep hands and fingers clear of
the laminator roller nip when
a d j u s t i n g P R E S S U R E .
Y o u c a n b e C R U S H E D o r B U R N E D !
W A R N I N G
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
Y o u m a y b e C R U S H E D o r B U R N E D !
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
Excessive pressure will cause the
substrate to bow or flatten.
INFORMATION
CAUTION
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.
