Gaumard HAL S1030, Руководство пользователя

Страница: 25 / 76

HAL® S1030
| USER GUIDE
Working with HAL | 25
It is recommended that the CO2 canister be plugged
in just before the start of the training session to get
the maximum duration of run time. If left overnight,
the canister may leak some CO2.
To install the CO2 cartridge:
1.
Remove the right leg skin cover.
2.
Remove the tibia I/O insert.
3.
Remove the adapter harness located
inside the right lower leg chamber.
4.
Screw in the new CO2 cartridge
into the harness adapter.
NOTE: As the cartridge is tightened, the
harness adapter will puncture the CO2 seal.
When the seal on the cartridge is broken,
it will begin to feel cool to the touch.
Continue to tighten the CO2 cartridge until
it is fully secured in the harness adapter.