Gaumard HAL S1030, Руководство пользователя

Страница: 21 / 76

In conjunction with artificial ventilations it is possible
to perform chest compressions on HAL as you would
on a real patient. However, HAL's chest compressions
do not provide feedback in the software.
HAL® S1030
| USER GUIDE
Working with HAL | 21
5.
On the next page, begin to perform 5 correct
artificial ventilations one at a time. The gray oval
will light up green as each one is recorded.
NOTE: Before clicking 'Finish', the performed
artificial ventilations will be saved. A summary
report will appear, and if the information
is not satisfactory, redo the calibration.
6.
When done with all 5 artificial
ventilations, click 'Finish'.
After the calibration of the artificial ventilations
has been performed, the vitals in the UNI
software may now be adjusted to parameters
that require artificial ventilation.
An easy way to do this is to adjust
the respiratory rate to zero.
1.
Under the 'Breathing' section on the
left-hand side of the UNI software,
locate 'Respiratory Rate'.
2.
Click on 'Respiratory Rate' and adjust the slider
bar all the way to the left or type in zero.