HAL® S1030
|
USER GUIDE
14 | Initial Setup
Adding a Serial Number to the Profile
1.
Select the desired profile.
2.
Click the "+" button to the right
of the serial number.
3.
A "New Serial Number" pop up will appear.
Type in the numerical serial number
of the simulator and click "Set!".
4.
Click the 'Start' button to initialize the simulator.
NOTE: After clicking 'Start', UNI and
the simulator will be established.
A pop up will appear, stating the simulator is
establishing communication. Once the gray bar
loads completely blue, the simulator will turn on.
New products sent with their control laptop/tablet
will have the serial number preset at factory. Should it
be necessary to add a serial number, do the following:
Содержание HAL S1030
Страница 2: ...HAL S1030 USER GUIDE ii...
Страница 76: ......
