10.10.
Test mode configuration
Touching "FUNC" switch with Magnet-bar for 2 seconds in Measuring
Condition will enter the Password mode.
Touch the "FUNC" switch after setting password using "↑" or "↓" switch.
Select “TEST MODE” by touching "↑" or "↓" switch.
Touching “FUNC” switch when “TEST MODE” is displayed will enter TEST
setting Mode.
Measuring Condition will return on touching “RESET” switch.
This item sets whether to include mA Output during the TEST.
Touching the “↑” or “↓” Switch will toggle the ON/OFF status; if it is
ON, mA will be output by the setting value during TEST.
This item performs the TEST.
Test Gas value is set by touching “↑” or “↓” Switch; if the mA Output is
ON, the mA Output is displayed coupled with Test Gas value.
TEST MODE will return on touching “FUNC” switch.
[ TEST ]
[ TEST ]
[ TEST ]
[ TEST ]
[ 0]
[ 0]
[ 0]
[ 0]
mA OUT
mA OUT
mA OUT
mA OUT
[OFF]
[OFF]
[OFF]
[OFF]
TEST
TEST
TEST
TEST
MODE
MODE
MODE
MODE
PASSWORD
PASSWORD
PASSWORD
PASSWORD
[**]
[**]
[**]
[**]
