1.
Overview
GTD2000-Tx toxic gas detector was developed in order to prevent accident by detecting gas
leaking in industrial fields such as various toxic gases that are generated in plants manufacturing
or using toxic gas, gas storage, or in the manufacturing process.
GTD2000-Tx toxic gas leak detector is installed in areas of risk of leakage; constantly and
continuously detects gas leak; displays the measured value in the liquid crystal display (LCD)
installed in the detector; and provides DC4-20mA standard output signal.
In addition, the Cable Connection Length of DC4 ~ 20mA standard output signal between
sensor element and receiver extends up to 2,500m (When
Cable CVVS or CVVSB 1.5sq
or
equivalent is used). This GTD2000-Tx toxic gas detector should be used at an elevation of less
than 1000M.
2.
Structure
The body of GTD2000-Tx is made of aluminum alloy, and completely explosion-proof (Ex d IIC
T6). The product may be installed anywhere risky of combustible gas leak and explosion,
displaying the gas leak status in the installation site on the built-in liquid crystal display (LCD)
within the sensing unit.
The internal structure is composed of a liquid crystal display unit displaying the measurement; a
terminal unit sending the measured value (DC4-20mA) to outside; and a PCB Board. A magnet bar
is installed outside, so maintenance work is convenient because calibration is possible from
outside using this magnet-bar.
