GAS GAS Enduro 2T 250 2018, Руководство пользователя

Страница: 53 / 77

Owner's Manual
-53-
Maintenance
36.-General luBriCatiOn
Lubricate the parts shown, periodically or when the vehicle is wet, especially after
using high-pressure water. Before lubricating each part, clean the rusted parts with
antioxidant and remove any remaining grease, oil or dirt.
General lubrication
• clutch lever (1).
• front brake lever (2).
• Rear brake pedal (3).
• Rear brake pedal bearing (4).
• gear shift lever (5).
use a spray with a tube to lubricate with pressure.
use grease inside the throttle cable.
Chain lubrication
This is necessary after riding on wet ground when the chain looks dry.
its chain is made of seals, therefore you must use a specific lubricant for this type
of chain. your official
Gas Gas
service centre will gladly supply you with one.
37.-SteerinG BearinG
for this check, adjustment, or change, please contact your official Gas Gas
service centre.
38.-wHeel BearinG
for this check, adjustment, or change, please contact your official Gas Gas
service centre.
39.-SwinGarM anD linkaGe
for this check, adjustment, or change, please contact your official Gas Gas
service centre.
40.-rear SuSPenSiOn
shock absorber oil change
for this check, adjustment, or change, please contact your official Gas Gas
service centre.
1
2
4 3
5